Code should execute sequentially if run in a Jupyter notebook

- See the set up page to install Jupyter, Julia (1.0+) and all necessary libraries
- Please direct feedback to contact@quantecon.org or the discourse forum
- For some notebooks, enable content with "Trust" on the command tab of Jupyter lab
- If using QuantEcon lectures for the first time on a computer, execute
`] add InstantiateFromURL`inside of a notebook or the REPL

# Markov Perfect Equilibrium¶

## Overview¶

This lecture describes the concept of Markov perfect equilibrium

Markov perfect equilibrium is a key notion for analyzing economic problems involving dynamic strategic interaction, and a cornerstone of applied game theory

In this lecture we teach Markov perfect equilibrium by example

We will focus on settings with

- two players
- quadratic payoff functions
- linear transition rules for the state

Other references include chapter 7 of [LS18]

### Setup¶

```
using InstantiateFromURL
activate_github("QuantEcon/QuantEconLecturePackages", tag = "v0.9.8");
```

```
using LinearAlgebra, Statistics, Compat, QuantEcon
```

## Background¶

Markov perfect equilibrium is a refinement of the concept of Nash equilibrium

It is used to study settings where multiple decision makers interact non-cooperatively over time, each seeking to pursue its own objective

The agents in the model face a common state vector, the time path of which is influenced by – and influences – their decisions

In particular, the transition law for the state that confronts each agent is affected by decision rules of other agents

Individual payoff maximization requires that each agent solve a dynamic programming problem that includes this transition law

Markov perfect equilibrium prevails when no agent wishes to revise its policy, taking as given the policies of all other agents

Well known examples include

- Choice of price, output, location or capacity for firms in an industry (e.g., [EP95], [Rya12], [DS10])
- Rate of extraction from a shared natural resource, such as a fishery (e.g., [LM80], [VL11])

Let’s examine a model of the first type

### Example: A duopoly model¶

Two firms are the only producers of a good the demand for which is governed by a linear inverse demand function

$$ p = a_0 - a_1 (q_1 + q_2) \tag{1} $$

Here $ p = p_t $ is the price of the good, $ q_i = q_{it} $ is the output of firm $ i=1,2 $ at time $ t $ and $ a_0 > 0, a_1 >0 $

In (1) and what follows,

- the time subscript is suppressed when possible to simplify notation
- $ \hat x $ denotes a next period value of variable $ x $

Each firm recognizes that its output affects total output and therefore the market price

The one-period payoff function of firm $ i $ is price times quantity minus adjustment costs:

$$ \pi_i = p q_i - \gamma (\hat q_i - q_i)^2, \quad \gamma > 0 , \tag{2} $$

Substituting the inverse demand curve (1) into (2) lets us express the one-period payoff as

$$ \pi_i(q_i, q_{-i}, \hat q_i) = a_0 q_i - a_1 q_i^2 - a_1 q_i q_{-i} - \gamma (\hat q_i - q_i)^2 , \tag{3} $$

where $ q_{-i} $ denotes the output of the firm other than $ i $

The objective of the firm is to maximize $ \sum_{t=0}^\infty \beta^t \pi_{it} $

Firm $ i $ chooses a decision rule that sets next period quantity $ \hat q_i $ as a function $ f_i $ of the current state $ (q_i, q_{-i}) $

An essential aspect of a Markov perfect equilibrium is that each firm takes the decision rule of the other firm as known and given

Given $ f_{-i} $, the Bellman equation of firm $ i $ is

$$ v_i(q_i, q_{-i}) = \max_{\hat q_i} \left\{\pi_i (q_i, q_{-i}, \hat q_i) + \beta v_i(\hat q_i, f_{-i}(q_{-i}, q_i)) \right\} \tag{4} $$

**Definition** A *Markov perfect equilibrium* of the duopoly model is a pair of value functions $ (v_1, v_2) $ and a pair of policy functions $ (f_1, f_2) $ such that, for each $ i \in \{1, 2\} $ and each possible state,

- The value function $ v_i $ satisfies the Bellman equation (4)
- The maximizer on the right side of (4) is equal to $ f_i(q_i, q_{-i}) $

The adjective “Markov” denotes that the equilibrium decision rules depend only on the current values of the state variables, not other parts of their histories

“Perfect” means complete, in the sense that the equilibrium is constructed by backward induction and hence builds in optimizing behavior for each firm at all possible future states

- These include many states that will not be reached when we iterate forward on the pair of equilibrium strategies $ f_i $ starting from a given initial state

### Computation¶

One strategy for computing a Markov perfect equilibrium is iterating to convergence on pairs of Bellman equations and decision rules

In particular, let $ v_i^j,f_i^j $ be the value function and policy function for firm $ i $ at the $ j $-th iteration

Imagine constructing the iterates

$$ v_i^{j+1}(q_i, q_{-i}) = \max_{\hat q_i} \left\{\pi_i (q_i, q_{-i}, \hat q_i) + \beta v^j_i(\hat q_i, f_{-i}(q_{-i}, q_i)) \right\} \tag{5} $$

These iterations can be challenging to implement computationally

However, they simplify for the case in which the one-period payoff functions are quadratic and the transition laws are linear — which takes us to our next topic

## Linear Markov perfect equilibria¶

As we saw in the duopoly example, the study of Markov perfect equilibria in games with two players leads us to an interrelated pair of Bellman equations

In linear quadratic dynamic games, these “stacked Bellman equations” become “stacked Riccati equations” with a tractable mathematical structure

We’ll lay out that structure in a general setup and then apply it to some simple problems

### Coupled linear regulator problems¶

We consider a general linear quadratic regulator game with two players

For convenience, we’ll start with a finite horizon formulation, where $ t_0 $ is the initial date and $ t_1 $ is the common terminal date

Player $ i $ takes $ \{u_{-it}\} $ as given and minimizes

$$ \sum_{t=t_0}^{t_1 - 1} \beta^{t - t_0} \left\{ x_t' R_i x_t + u_{it}' Q_i u_{it} + u_{-it}' S_i u_{-it} + 2 x_t' W_i u_{it} + 2 u_{-it}' M_i u_{it} \right\} \tag{6} $$

while the state evolves according to

$$ x_{t+1} = A x_t + B_1 u_{1t} + B_2 u_{2t} \tag{7} $$

Here

- $ x_t $ is an $ n \times 1 $ state vector and $ u_{it} $ is a $ k_i \times 1 $ vector of controls for player $ i $
- $ R_i $ is $ n \times n $
- $ S_i $ is $ k_{-i} \times k_{-i} $
- $ Q_i $ is $ k_i \times k_i $
- $ W_i $ is $ n \times k_i $
- $ M_i $ is $ k_{-i} \times k_i $
- $ A $ is $ n \times n $
- $ B_i $ is $ n \times k_i $

### Computing Equilibrium¶

We formulate a linear Markov perfect equilibrium as follows

Player $ i $ employs linear decision rules $ u_{it} = - F_{it} x_t $, where $ F_{it} $ is a $ k_i \times n $ matrix

A Markov perfect equilibrium is a pair of sequences $ \{F_{1t}, F_{2t}\} $ over $ t = t_0, \ldots, t_1 - 1 $ such that

- $ \{F_{1t}\} $ solves player 1’s problem, taking $ \{F_{2t}\} $ as given, and
- $ \{F_{2t}\} $ solves player 2’s problem, taking $ \{F_{1t}\} $ as given

If we take $ u_{2t} = - F_{2t} x_t $ and substitute it into (6) and (7), then player 1’s problem becomes minimization of

$$ \sum_{t=t_0}^{t_1 - 1} \beta^{t - t_0} \left\{ x_t' \Pi_{1t} x_t + u_{1t}' Q_1 u_{1t} + 2 u_{1t}' \Gamma_{1t} x_t \right\} \tag{8} $$

subject to

$$ x_{t+1} = \Lambda_{1t} x_t + B_1 u_{1t}, \tag{9} $$

where

- $ \Lambda_{it} := A - B_{-i} F_{-it} $
- $ \Pi_{it} := R_i + F_{-it}' S_i F_{-it} $
- $ \Gamma_{it} := W_i' - M_i' F_{-it} $

This is an LQ dynamic programming problem that can be solved by working backwards

The policy rule that solves this problem is

$$ F_{1t} = (Q_1 + \beta B_1' P_{1t+1} B_1)^{-1} (\beta B_1' P_{1t+1} \Lambda_{1t} + \Gamma_{1t}) \tag{10} $$

where $ P_{1t} $ solves the matrix Riccati difference equation

$$ P_{1t} = \Pi_{1t} - (\beta B_1' P_{1t+1} \Lambda_{1t} + \Gamma_{1t})' (Q_1 + \beta B_1' P_{1t+1} B_1)^{-1} (\beta B_1' P_{1t+1} \Lambda_{1t} + \Gamma_{1t}) + \beta \Lambda_{1t}' P_{1t+1} \Lambda_{1t} \tag{11} $$

Similarly, the policy that solves player 2’s problem is

$$ F_{2t} = (Q_2 + \beta B_2' P_{2t+1} B_2)^{-1} (\beta B_2' P_{2t+1} \Lambda_{2t} + \Gamma_{2t}) \tag{12} $$

where $ P_{2t} $ solves

$$ P_{2t} = \Pi_{2t} - (\beta B_2' P_{2t+1} \Lambda_{2t} + \Gamma_{2t})' (Q_2 + \beta B_2' P_{2t+1} B_2)^{-1} (\beta B_2' P_{2t+1} \Lambda_{2t} + \Gamma_{2t}) + \beta \Lambda_{2t}' P_{2t+1} \Lambda_{2t} \tag{13} $$

Here in all cases $ t = t_0, \ldots, t_1 - 1 $ and the terminal conditions are $ P_{it_1} = 0 $

The solution procedure is to use equations (10), (11), (12), and (13), and “work backwards” from time $ t_1 - 1 $

Since we’re working backwards, $ P_{1t+1} $ and $ P_{2t+1} $ are taken as given at each stage

Moreover, since

- some terms on the right hand side of (10) contain $ F_{2t} $
- some terms on the right hand side of (12) contain $ F_{1t} $

we need to solve these $ k_1 + k_2 $ equations simultaneously

#### Infinite horizon¶

We often want to compute the solutions of such games for infinite horizons, in the hope that the decision rules $ F_{it} $ settle down to be time invariant as $ t_1 \rightarrow +\infty $

In practice, we usually fix $ t_1 $ and compute the equilibrium of an infinite horizon game by driving $ t_0 \rightarrow - \infty $

This is the approach we adopt in the next section

### Implementation¶

We use the function nnash from QuantEcon.jl that computes a Markov perfect equilibrium of the infinite horizon linear quadratic dynamic game in the manner described above

## Application¶

Let’s use these procedures to treat some applications, starting with the duopoly model

### A duopoly model¶

To map the duopoly model into coupled linear-quadratic dynamic programming problems, define the state and controls as

$$ x_t := \begin{bmatrix} 1 \\ q_{1t} \\ q_{2t} \end{bmatrix} \quad \text{and} \quad u_{it} := q_{i,t+1} - q_{it}, \quad i=1,2 $$If we write

$$ x_t' R_i x_t + u_{it}' Q_i u_{it} $$where $ Q_1 = Q_2 = \gamma $,

$$ R_1 := \begin{bmatrix} 0 & -\frac{a_0}{2} & 0 \\ -\frac{a_0}{2} & a_1 & \frac{a_1}{2} \\ 0 & \frac{a_1}{2} & 0 \end{bmatrix} \quad \text{and} \quad R_2 := \begin{bmatrix} 0 & 0 & -\frac{a_0}{2} \\ 0 & 0 & \frac{a_1}{2} \\ -\frac{a_0}{2} & \frac{a_1}{2} & a_1 \end{bmatrix} $$then we recover the one-period payoffs in expression (3)

The law of motion for the state $ x_t $ is $ x_{t+1} = A x_t + B_1 u_{1t} + B_2 u_{2t} $ where

$$ A := \begin{bmatrix} 1 & 0 & 0 \\ 0 & 1 & 0 \\ 0 & 0 & 1 \end{bmatrix}, \quad B_1 := \begin{bmatrix} 0 \\ 1 \\ 0 \end{bmatrix}, \quad B_2 := \begin{bmatrix} 0 \\ 0 \\ 1 \end{bmatrix} $$The optimal decision rule of firm $ i $ will take the form $ u_{it} = - F_i x_t $, inducing the following closed loop system for the evolution of $ x $ in the Markov perfect equilibrium:

### Parameters and Solution¶

Consider the previously presented duopoly model with parameter values of:

- $ a_0 = 10 $
- $ a_1 = 2 $
- $ \beta = 0.96 $
- $ \gamma = 12 $

From these we compute the infinite horizon MPE using the following code

```
using QuantEcon, LinearAlgebra
# parameters
a0 = 10.0
a1 = 2.0
β = 0.96
γ = 12.0
# in LQ form
A = I + zeros(3, 3)
B1 = [0.0, 1.0, 0.0]
B2 = [0.0, 0.0, 1.0]
R1 = [ 0.0 -a0 / 2.0 0.0;
-a0 / 2.0 a1 a1 / 2.0;
0.0 a1 / 2.0 0.0]
R2 = [ 0.0 0.0 -a0 / 2.0;
0.0 0.0 a1 / 2.0;
-a0 / 2.0 a1 / 2.0 a1]
Q1 = Q2 = γ
S1 = S2 = W1 = W2 = M1 = M2 = 0.0
# solve using QE's nnash function
F1, F2, P1, P2 = nnash(A, B1, B2, R1, R2, Q1, Q2, S1, S2, W1, W2, M1, M2,
beta=β)
# display policies
println("Computed policies for firm 1 and firm 2:")
println("F1 = $F1")
println("F2 = $F2")
```

Running the code produces the following output

One way to see that $ F_i $ is indeed optimal for firm $ i $ taking $ F_2 $ as given is to use QuantEcon.jl’s LQ type

In particular, let’s take F2 as computed above, plug it into (8) and (9) to get firm 1’s problem and solve it using LQ

We hope that the resulting policy will agree with F1 as computed above

```
Λ1 = A - (B2 * F2)
lq1 = QuantEcon.LQ(Q1, R1, Λ1, B1, bet=β)
P1_ih, F1_ih, d = stationary_values(lq1)
F1_ih
```

This is close enough for rock and roll, as they say in the trade

Indeed, isapprox agrees with our assessment

```
isapprox(F1, F1_ih, atol=1e-7)
```

### Dynamics¶

Let’s now investigate the dynamics of price and output in this simple duopoly model under the MPE policies

Given our optimal policies $ F1 $ and $ F2 $, the state evolves according to (14)

The following program

- imports $ F1 $ and $ F2 $ from the previous program along with all parameters
- computes the evolution of $ x_t $ using (14)
- extracts and plots industry output $ q_t = q_{1t} + q_{2t} $ and price $ p_t = a_0 - a_1 q_t $

```
using Plots
gr(fmt=:png);
AF = A - B1 * F1 - B2 * F2
n = 20
x = zeros(3, n)
x[:, 1] = [1 1 1]
for t in 1:n-1
x[:, t+1] = AF * x[:, t]
end
q1 = x[2, :]
q2 = x[3, :]
q = q1 + q2 # total output, MPE
p = a0 .- a1 * q # price, MPE
plt = plot(q, color=:blue, lw=2, alpha=0.75, label="total output")
plot!(plt, p, color=:green, lw=2, alpha=0.75, label="price")
plot!(plt, title="Output and prices, duopoly MPE")
```

Note that the initial condition has been set to $ q_{10} = q_{20} = 1.0 $

To gain some perspective we can compare this to what happens in the monopoly case

The first panel in the next figure compares output of the monopolist and industry output under the MPE, as a function of time

The second panel shows analogous curves for price

Here parameters are the same as above for both the MPE and monopoly solutions

The monopolist initial condition is $ q_0 = 2.0 $ to mimic the industry initial condition $ q_{10} = q_{20} = 1.0 $ in the MPE case

As expected, output is higher and prices are lower under duopoly than monopoly

## Exercises¶

### Exercise 1¶

Replicate the pair of figures showing the comparison of output and prices for the monopolist and duopoly under MPE

Parameters are as in duopoly_mpe.jl and you can use that code to compute MPE policies under duopoly

The optimal policy in the monopolist case can be computed using QuantEcon.jl’s LQ type

### Exercise 2¶

In this exercise we consider a slightly more sophisticated duopoly problem

It takes the form of infinite horizon linear quadratic game proposed by Judd [Jud90]

Two firms set prices and quantities of two goods interrelated through their demand curves

Relevant variables are defined as follows:

- $ I_{it} $ = inventories of firm $ i $ at beginning of $ t $
- $ q_{it} $ = production of firm $ i $ during period $ t $
- $ p_{it} $ = price charged by firm $ i $ during period $ t $
- $ S_{it} $ = sales made by firm $ i $ during period $ t $
- $ E_{it} $ = costs of production of firm $ i $ during period $ t $
- $ C_{it} $ = costs of carrying inventories for firm $ i $ during $ t $

The firms’ cost functions are

- $ C_{it} = c_{i1} + c_{i2} I_{it} + 0.5 c_{i3} I_{it}^2 $
- $ E_{it} = e_{i1} + e_{i2}q_{it} + 0.5 e_{i3} q_{it}^2 $ where $ e_{ij}, c_{ij} $ are positive scalars

Inventories obey the laws of motion

$$ I_{i,t+1} = (1 - \delta) I_{it} + q_{it} - S_{it} $$Demand is governed by the linear schedule

$$ S_t = D p_{it} + b $$where

- $ S_t = \begin{bmatrix} S_{1t} & S_{2t} \end{bmatrix}' $
- $ D $ is a $ 2\times 2 $ negative definite matrix and
- $ b $ is a vector of constants

Firm $ i $ maximizes the undiscounted sum

$$ \lim_{T \to \infty}\ {1 \over T}\ \sum^T_{t=0}\ \left( p_{it} S_{it} - E_{it} - C_{it} \right) $$We can convert this to a linear quadratic problem by taking

$$ u_{it} = \begin{bmatrix} p_{it} \\ q_{it} \end{bmatrix} \quad \text{and} \quad x_t = \begin{bmatrix} I_{1t} \\ I_{2t} \\ 1 \end{bmatrix} $$Decision rules for price and quantity take the form $ u_{it} = -F_i x_t $

The Markov perfect equilibrium of Judd’s model can be computed by filling in the matrices appropriately

The exercise is to calculate these matrices and compute the following figures

The first figure shows the dynamics of inventories for each firm when the parameters are

```
δ = 0.02
D = [ -1 0.5;
0.5 -1]
b = [25, 25]
c1 = c2 = [1, -2, 1]
e1 = e2 = [10, 10, 3]
```

Inventories trend to a common steady state

If we increase the depreciation rate to $ \delta = 0.05 $, then we expect steady state inventories to fall

This is indeed the case, as the next figure shows

## Solutions¶

### Exercise 1¶

First let’s compute the duopoly MPE under the stated parameters

```
# parameters
a0 = 10.0
a1 = 2.0
β = 0.96
γ = 12.0
# in LQ form
A = I + zeros(3, 3)
B1 = [0.0, 1.0, 0.0]
B2 = [0.0, 0.0, 1.0]
R1 = [ 0.0 -a0 / 2.0 0.0;
-a0 / 2.0 a1 a1 / 2.0;
0.0 a1 / 2.0 0.0]
R2 = [ 0.0 0.0 -a0 / 2.0;
0.0 0.0 a1 / 2.0;
-a0 / 2.0 a1 / 2.0 a1]
Q1 = Q2 = γ
S1 = S2 = W1 = W2 = M1 = M2 = 0.0
# solve using QE's nnash function
F1, F2, P1, P2 = nnash(A, B1, B2, R1, R2, Q1, Q2, S1, S2, W1, W2, M1, M2,
beta=β)
```

Now we evaluate the time path of industry output and prices given initial condition $ q_{10} = q_{20} = 1 $

```
AF = A - B1 * F1 - B2 * F2
n = 20
x = zeros(3, n)
x[:, 1] = [1 1 1]
for t in 1:(n-1)
x[:, t+1] = AF * x[:, t]
end
q1 = x[2, :]
q2 = x[3, :]
q = q1 + q2 # Total output, MPE
p = a0 .- a1 * q # Price, MPE
```

Next let’s have a look at the monopoly solution

For the state and control we take

$$ x_t = q_t - \bar q \quad \text{and} \quad u_t = q_{t+1} - q_t $$To convert to an LQ problem we set

$$ R = a_1 \quad \text{and} \quad Q = \gamma $$in the payoff function $ x_t' R x_t + u_t' Q u_t $ and

$$ A = B = 1 $$in the law of motion $ x_{t+1} = A x_t + B u_t $

We solve for the optimal policy $ u_t = - Fx_t $ and track the resulting dynamics of $ \{q_t\} $, starting at $ q_0 = 2.0 $

```
R = a1
Q = γ
A = B = 1
lq_alt = QuantEcon.LQ(Q, R, A, B, bet=β)
P, F, d = stationary_values(lq_alt)
q̄ = a0 / (2.0 * a1)
qm = zeros(n)
qm[1] = 2
x0 = qm[1]-q̄
x = x0
for i in 2:n
x = A * x - B * F[1] * x
qm[i] = float(x) + q̄
end
pm = a0 .- a1 * qm
```

Let’s have a look at the different time paths

```
plt_q = plot(qm, color=:blue, lw=2, alpha=0.75, label="monopolist output")
plot!(plt_q, q, color=:green, lw=2, alpha=0.75, label="MPE total output")
plot!(plt_q, xlabel="time", ylabel="output", ylim=(2,4),legend=:topright)
plt_p = plot(pm, color=:blue, lw=2, alpha=0.75, label="monopolist price")
plot!(plt_p, p, color=:green, lw=2, alpha=0.75, label="MPE price")
plot!(plt_p, xlabel="time", ylabel="price",legend=:topright)
plot(plt_q, plt_p, layout=(2,1), size=(700,600))
```

### Exercise 2¶

We treat the case $ \delta = 0.02 $

```
δ = 0.02
D = [-1 0.5;
0.5 -1]
b = [25, 25]
c1 = c2 = [1, -2, 1]
e1 = e2 = [10, 10, 3]
δ_1 = 1-δ
```

Recalling that the control and state are

$$ u_{it} = \begin{bmatrix} p_{it} \\ q_{it} \end{bmatrix} \quad \text{and} \quad x_t = \begin{bmatrix} I_{1t} \\ I_{2t} \\ 1 \end{bmatrix} $$we set up the matrices as follows:

```
# create matrices needed to compute the Nash feedback equilibrium
A = [δ_1 0 -δ_1 * b[1];
0 δ_1 -δ_1 * b[2];
0 0 1]
B1 = δ_1 * [1 -D[1, 1];
0 -D[2, 1];
0 0]
B2 = δ_1 * [0 -D[1, 2];
1 -D[2, 2];
0 0]
R1 = -[0.5 * c1[3] 0 0.5 * c1[2];
0 0 0;
0.5 * c1[2] 0 c1[1]]
R2 = -[0 0 0;
0 0.5 * c2[3] 0.5*c2[2];
0 0.5 * c2[2] c2[1]]
Q1 = [-0.5*e1[3] 0;
0 D[1, 1]]
Q2 = [-0.5*e2[3] 0;
0 D[2, 2]]
S1 = zeros(2, 2)
S2 = copy(S1)
W1 = [ 0.0 0.0;
0.0 0.0;
-0.5 * e1[2] b[1] / 2.0]
W2 = [ 0.0 0.0;
0.0 0.0;
-0.5 * e2[2] b[2] / 2.0]
M1 = [0.0 0.0;
0.0 D[1, 2] / 2.0]
M2 = copy(M1)
```

We can now compute the equilibrium using `qe.nnash`

```
F1, F2, P1, P2 = nnash(A, B1, B2, R1, R2, Q1, Q2, S1, S2, W1, W2, M1, M2)
println("\nFirm 1's feedback rule:\n")
println(F1)
println("\nFirm 2's feedback rule:\n")
println(F2)
```

Now let’s look at the dynamics of inventories, and reproduce the graph corresponding to $ \delta = 0.02 $

```
AF = A - B1 * F1 - B2 * F2
n = 25
x = zeros(3, n)
x[:, 1] = [2 0 1]
for t in 1:(n-1)
x[:, t+1] = AF * x[:, t]
end
I1 = x[1, :]
I2 = x[2, :]
plot(I1, color=:blue, lw=2, alpha=0.75, label="inventories, firm 1")
plot!(I2, color=:green, lw=2, alpha=0.75, label="inventories, firm 2")
plot!(title="delta = 0.02")
```