How to read this lecture...

Code should execute sequentially if run in a Jupyter notebook

  • See the set up page to install Jupyter, Julia (1.0+) and all necessary libraries
  • Please direct feedback to or the discourse forum
  • For some notebooks, enable content with "Trust" on the command tab of Jupyter lab
  • If using QuantEcon lectures for the first time on a computer, execute ] add InstantiateFromURL inside of a notebook or the REPL

Packages, Testing, and Continuous Integration

Co-authored with Arnav Sood

This lecture discusses structuring a project as a Julia module, and testing it with tools from GitHub

Benefits include

  • Specifying dependencies (and their versions) so that your project works across Julia setups and over time
  • Being able to load your project’s functions from outside without copy/pasting
  • Writing tests that run locally, and automatically on the GitHub server
  • Having GitHub test your project across operating systems, Julia versions, etc.

Project Setup

Account Setup

Travis CI

As we’ll see later, Travis is a service that automatically tests your project on the GitHub server

First, we need to make sure that your GitHub account is set up with Travis CI and Codecov

As a reminder, make sure you signed up for the GitHub Student Developer Pack or Academic Plan if eligible

Navigate to the website and click “sign up with GitHub” – supply your credentials

If you get stuck, see the Travis tutorial


Codecov is a service that tells you how comprehensive your tests are (i.e., how much of your code is actually tested)

To sign up, visit the Codecov website, and click “sign up”

Next, click “add a repository” and enable private scope (this allows Codecov to service your private projects)

The result should be

This is all we need for now

Julia Setup

In [1]:
using InstantiateFromURL
github_project("QuantEcon/quantecon-notebooks-julia", version = "0.3.0")

Note: Before these steps, make sure that you’ve either completed the version control lecture or run

git config --global "Your Name"

Note: Throughout this lecture, important points and sequential workflow steps are listed as bullets

To set up a project on Julia:

using PkgTemplates
  • Create a template for your project

This specifies metadata like the license we’ll be using (MIT by default), the location (~/.julia/dev by default), etc.

ourTemplate = Template(;user="quanteconuser", plugins = [TravisCI(), Codecov()])

Note: Make sure you replace the quanteconuser with your GitHub ID

  • Create a specific project based off this template
generate("ExamplePackage.jl", ourTemplate)

If we navigate to the package directory, we should see something like the following

As a reminder, the location of your .julia folder can be found by running DEPOT_PATH[1] in a REPL

Note: On Mac, this may be hidden; you can either start a terminal, cd ~ and then cd .julia, or make hidden files visible in the Finder

Adding a Project to Git

The next step is to add this project to Git version control

  • Open the repository screen in your account as discussed previously

We’ll want the following settings

In particular

  • The repo you create should have the same name as the project we added
  • We should leave the boxes unchecked for the, LICENSE, and .gitignore, since these are handled by PkgTemplates


  • Drag and drop your folder from your ~/.julia/dev directory to GitHub Desktop
  • Click the “publish branch” button to upload your files to GitHub

If you navigate to your git repo (ours is here), you should see something like

Note: Be sure that you don’t separately clone the repo you just added to another location (i.e., to your desktop)

A key note is that you have some set of files on your local machine (here in ~/.julia/dev/ExamplePackage.jl) and git is plugged into those files

For convenience, you might want to create a shortcut to that location somewhere accessible

Adding a Project to the Julia Package Manager

We also want Julia’s package manager to be aware of the project

  • Open a REPL in the newly created project directory, either by noting the path printed above, or by running the following in a REPL
cd(joinpath(DEPOT_PATH[1], "dev", "ExamplePackage"))

Note the lack of .jl!

  • Run the following
] activate

to get into the main Julia environment (more on environments in the second half of this lecture)

  • And run
] dev .

to add the package

You can see the change reflected in our default package list by running

] st

For more on the package mode, see the tools and editors lecture

Using the Package Manager

Now, from any Julia terminal in the future, we can run

using ExamplePackage

To use its exported functions

We can also get the path to this by running

using ExamplePackage
pathof(ExamplePackage) # returns path to src/ExamplePackage.jl

Project Structure

Let’s unpack the structure of the generated project

  • The first directory, .git, holds the version control information
  • The src directory contains the project’s source code – it should contain only one file (ExamplePackage.jl), which reads
module ExamplePackage

greet() = print("Hello World!")

end # module
  • Likewise, the test directory should have only one file (runtests.jl), which reads
using ExamplePackage
using Test

@testset "ExamplePackage.jl" begin
    # Write your own tests here.

In particular, the workflow is to export objects we want to test (using ExamplePackage), and test them using Julia’s Test module

The other important text files for now are

  • Project.toml and Manifest.toml, which contain dependency information

In particular, the Project.toml contains a list of dependencies, and the Manifest.toml specifies their exact versions and sub-dependencies

  • The .gitignore file (which may display as an untitled file), which contains files and paths for git to ignore

Project Workflow

Dependency Management


As before, the .toml files define an environment for our project, or a set of files which represent the dependency information

The actual files are written in the TOML language, which is a lightweight format to specify configuration options

This information is the name of every package we depend on, along with the exact versions of those packages

This information (in practice, the result of package operations we execute) will be reflected in our ExamplePackage.jl directory’s TOML, once that environment is activated (selected)

This allows us to share the project with others, who can exactly reproduce the state used to build and test it

See the Pkg3 docs for more information

Pkg Operations

For now, let’s just try adding a dependency

  • Activate the package environment (to be run from the base, v1.1 environment)
] activate ExamplePackage
This tells Julia to write the results of package operations to `ExampleProject`’s TOML,
and use the versions of packages specified there

Note that the base environment isn’t special, except that it’s what’s loaded by a freshly-started REPL or Jupyter notebook

  • Add a package
] add Expectations

We can track changes in the TOML, as before

Here’s the Manifest.toml

We can also run other operations, like ] up, ] precompile, etc.

Package operations are listed in detail in the tools and editors lecture

Recall that, to quit the active environment and return to the base (v1.1), simply run

] activate

Writing Code

The basic idea is to work in tests/runtests.jl, while reproducible functions should go in the src/ExamplePackage.jl

For example, let’s say we add Distributions.jl

] activate ExamplePackage
] add Distributions

and edit the source (paste this into the file itself ) to read as follows

module ExamplePackage

greet() = print("Hello World!")

using Expectations, Distributions

function foo(μ = 1., σ = 2.)
    d = Normal(μ, σ)
    E = expectation(d)
    return E(x -> sin(x))

export foo

end # module

Let’s try calling this

] activate
using ExamplePackage
foo() # exported, so don't need to qualify the namespace

Note: If you didn’t follow the instructions to add a startup file, you may need to quit your REPL and load the package again

Jupyter Workflow

We can also work with the package from a Jupyter notebook

Let’s create a new output directory in our project, and run jupyter lab from it

Create a new notebook output.ipynb

From here, we can use our package’s functions as we would functions from other packages

This lets us produce neat output documents, without pasting the whole codebase

We can also run package operations inside the notebook

The change will be reflected in the Project.toml file

Note that, as usual, we had to first activate ExamplePackage first before making our dependency changes

name = "ExamplePackage"
uuid = "f85830d0-e1f0-11e8-2fad-8762162ab251"
authors = ["QuantEcon User <>"]
version = "0.1.0"

Distributions = "31c24e10-a181-5473-b8eb-7969acd0382f"
Expectations = "2fe49d83-0758-5602-8f54-1f90ad0d522b"
Parameters = "d96e819e-fc66-5662-9728-84c9c7592b0a"

Test = "8dfed614-e22c-5e08-85e1-65c5234f0b40"

test = ["Test"]

There will also be changes in the Manifest as well

Be sure to add output/.ipynb_checkpoints to your .gitignore file, so that’s not checked in

Make sure you’ve activated the project environment (] activate ExamplePackage) before you try to propagate changes

Collaborative Work

For someone else to get the package, they simply need to

  • Run the following command
] dev

This will place the repository inside their ~/.julia/dev folder

  • Drag-and-drop the folder to GitHub desktop in the usual way

Recall that the path to your ~/.julia folder is

In [2]:

They can then collaborate as they would on other git repositories

In particular, they can run

] activate ExamplePackage

to load the list of dependencies, and

] instantiate

to make sure they are installed on the local machine

Unit Testing

It’s important to make sure that your code is well-tested

There are a few different kinds of test, each with different purposes

  • Unit testing makes sure that individual pieces of a project work as expected
  • Integration testing makes sure that they fit together as expected
  • Regression testing makes sure that behavior is unchanged over time

In this lecture, we’ll focus on unit testing

In general, well-written unit tests (which also guard against regression, for example by comparing function output to hardcoded values) are sufficient for most small projects

The Test Module

Julia provides testing features through a built-in package called Test, which we get by using Test

The basic object is the macro @test

In [3]:
using Test
@test 1 == 1
@test 1  1
Test Passed

Tests will pass if the condition is true, or fail otherwise

If a test is failing, we should flag it with @test_broken as below

In [4]:
@test_broken 1 == 2
Test Broken
  Expression: 1 == 2

This way, we still have access to information about the test, instead of just deleting it or commenting it out

There are other test macros, that check for things like error handling and type-stability

Advanced users can check the Julia docs


Let’s add some unit tests for the foo() function we defined earlier

Our tests/runtests.jl file should look like this

As before, this should be pasted into the file directly

using ExamplePackage
using Test

@test foo()  0.11388071406436832
@test foo(1, 1.5)  0.2731856314283442
@test_broken foo(1, 0) # tells us this is broken

And run it by typing ] test into an activated REPL (i.e., a REPL where you’ve run ] activate ExamplePackage)

Test Sets

By default, the runtests.jl folder starts off with a @testset

This is useful for organizing different batches of tests, but for now we can simply ignore it

To learn more about test sets, see the docs

Running Tests

There are a few different ways to run the tests for your package

  • Run the actual runtests.jl, say by hitting shift-enter on it in Atom
  • From a fresh (v1.1) REPL, run ] test ExamplePackage
  • From an activated (ExamplePackage) REPL, simply run ] test (recall that you can activate with ] activate ExamplePackage)

Continuous Integration with Travis


By default, Travis should have access to all your repositories and deploy automatically

This includes private repos if you’re on a student developer pack or an academic plan (Travis detects this automatically)

To change this, go to “settings” under your GitHub profile

Click “Applications,” then “Travis CI,” then “Configure,” and choose the repos you want to be tracked

Build Options

By default, Travis will compile and test your project (i.e., “build” it) for new commits and PRs for every tracked repo with a .travis.yml file

We can see ours by opening it in Atom

# Documentation:
language: julia
- linux
- osx
- 1.1
- nightly
    - julia: nightly
fast_finish: true
email: false
- julia -e 'using Pkg; Pkg.add("Coverage"); using Coverage; Codecov.submit(process_folder())'

This is telling Travis to build the project in Julia, on OSX and Linux, using Julia v1.1 and the latest development build (“nightly”)

It also says that if the nightly version doesn’t work, that shouldn’t register as a failure

Note You won’t need OSX unless you’re building something Mac-specific, like iOS or Swift

You can delete those lines to speed up the build, likewise for the nightly Julia version

Working with Builds

As above, builds are triggered whenever we push changes or open a pull request

For example, if we push our changes to the server and then click the Travis badge (the one which says “build”) on the README, we should see something like

Note that you may need to wait a bit and/or refresh your browser

This gives us an overview of all the builds running for that commit

To inspect a build more closely (say, if it fails), we can click on it and expand the log options

Note that the build times here aren’t informative, because we can’t generally control the hardware to which our job is allocated

We can also cancel specific jobs, either from their specific pages or by clicking the grey “x” button on the dashboard

Lastly, we can trigger builds manually (without a new commit or PR) from the Travis overview

To commit without triggering a build, simply add “[ci skip]” somewhere inside the commit message

Travis and Pull Requests

One key feature of Travis is the ability to see at-a-glance whether PRs pass tests before merging them

This happens automatically when Travis is enabled on a repository

For an example of this feature, see this PR in the Games.jl repository

Code Coverage

Beyond the success or failure of our test suite, we also want to know how much of our code the tests cover

The tool we use to do this is called Codecov


You’ll find that Codecov is automatically enabled for public repos with Travis

For private ones, you’ll need to first get an access token

Add private scope in the Codecov website, just like we did for Travis

Navigate to the repo settings page (i.e., for our repo) and copy the token

Next, go to your Travis settings and add an environment variable as below

Interpreting Results

Click the Codecov badge to see the build page for your project

This shows us that our tests cover 50% of our functions in src//

Note: To get a more detailed view, we can click the src// and the resultant filename

Note: Codecov may take a few minutes to run for the first time

This shows us precisely which methods (and parts of methods) are untested

Pull Requests to External Julia Projects

As mentioned in version control, sometimes we’ll want to work on external repos that are also Julia projects

  • ] dev the git URL (or package name, if the project is a registered Julia package), which will both clone the git repo to ~/.julia/dev and sync it with the Julia package manager

For example, running

] dev Expectations

will clone the repo to ~/.julia/dev/Expectations

Make sure you do this from the base Julia environment (i.e., after running ] activate without arguments)

As a reminder, you can find the location of your ~/.julia folder (called the “user depot”), by running

In [5]:

The ] dev command will also add the target to the package manager, so that whenever we run using Expectations, Julia will load our cloned copy from that location

using Expectations
pathof(Expectations) # points to our git clone
  • Drag that folder to GitHub Desktop
  • The next step is to fork the original (external) package from its website (i.e., to your account ( in our case)

  • Edit the settings in GitHub Desktop (from the “Repository” dropdown) to reflect the new URL

Here, we’d change the highlighted text to read quanteconuser, or whatever our GitHub ID is

  • If you make some changes in a text editor and return to GitHub Desktop, you’ll see something like

Note: As before, we’re editing the files directly in ~/.julia/dev, as opposed to cloning the repo again.

Here, for example, we’re revising the README

  • Clicking “commit to master” (recall that the checkboxes next to each file indicate whether it’s to be committed) and then pushing (e.g., hitting “push” under the “Repository” dropdown) will add the committed changes to your account

To confirm this, we can check the history on our account here; for more on working with git repositories, see the version control lecture

The green check mark indicates that Travis tests passed for this commit

  • Clicking “new pull request” from the pull requests tab will show us a snapshot of the changes, and let us create a pull request for project maintainers to review and approve

For more on PRs, see the relevant section of the version control lecture

For more on forking, see the docs on GitHub Desktop and the GitHub Website

Case with Write Access

If you have write access to the repo, we can skip the preceding steps about forking and changing the URL

You can use ] dev on a package name or the URL of the package.

] dev Expectations

or ] dev as an example for an unreleased package by URL

Which will again clone the repo to ~/.julia/dev, and use it as a Julia package

using Expectations
pathof(Expectations) # points to our git clone

Next, drag that folder to GitHub Desktop as before

Then, in order to work with the package locally, all we need to do is open the ~/.julia/dev/Expectations in a text editor (like Atom)

From here, we can edit this package just like we created it ourselves and use GitHub Desktop to track versions of our package files (say, after ] up, or editing source code, ] add Package, etc.)

Removing a Julia Package

To “un-dev” a Julia package (say, if we want to use our old Expectations.jl), you can simply run

] free Expectations

To delete it entirely, simply run

] rm Expectations

From a REPL where that package is in the active environment


Another goal of testing is to make sure that code doesn’t slow down significantly from one version to the next

We can do this using tools provided by the BenchmarkTools.jl package

See the need for speed lecture for more details

Additional Notes

  • The JuliaCI organization provides more Julia utilities for continuous integration and testing


To review the workflow for creating, versioning, and testing a new project end-to-end

  1. Create the local package directory using the PkgTemplates.jl
  2. Add that package to the Julia package manager, by opening a Julia REPL in the ~/.julia/dev/ExamplePackage.jl, making sure the active environment is the default one (v1.1), and hitting ] dev .
  3. Drag-and-drop that folder to GitHub Desktop
  4. Create an empty repository with the same name on the GitHub server
  5. Push from GitHub Desktop to the server
  6. Open the original project folder (e.g., ~/.julia/dev/ExamplePackage.jl) in Atom
  7. Make changes, test, iterate on it, etc. As a rule, functions like should live in the src/ directory once they’re stable, and you should export them from that file with export func1, func2. This will export all methods of func1, func2, etc.
  8. Commit them in GitHub Desktop as you go (i.e., you can and should use version control to track intermediate states)
  9. Push to the server, and see the Travis and Codecov results (note that these may take a few minutes the first time)


Exercise 1

Following the instructions for a new project, create a new package on your github account called NewtonsMethod.jl

In this package, you should create a simple package to do Newton’s Method using the code you did in the Newton’s method exercise in Introductory Examples

In particular, within your package you should have two functions

  • newtonroot(f, f′; x₀, tol = 1E-7, maxiter = 1000)
  • newtonroot(f; x₀, tol = 1E-7, maxiter = 1000)

Where the second function uses Automatic Differentiation to call the first.

The package should include

  • implementations of those functions in the /src directory
  • comprehensive set of tests
  • project and manifest files to replicate your development environment
  • automated running of the tests with Travis CI in GitHub

For the tests, you should have at the very minimum

  • a way to handle non-convergence (e.g. return back nothing as discussed in error handling
  • several @test for the root of a known function, given the f and analytical f' derivatives
  • tests of those roots using the automatic differentiation version of the function
  • test of finding those roots with a BigFloat and not just a Float64
  • test of non-convergence for a function without a root (e.g. $ f(x) = 2 + x^2 $ )
  • test to ensure that the maxiter is working (e.g. what happens if you call maxiter = 5
  • test to ensure that tol is working

And anything else you can think of. You should be able to run ] test for the project to check that the test-suite is running, and then ensure that it is running automatically on Travis CI

Push a commit to the repository which breaks one of the tests and see what the Travis CI reports after running the build